Ema Field Permeability Testing Successful
Released
Released
Announcement PDF
ASX Announcement
Released 19th August 2024
FIELD PERMEABILITY AND LAB TESTING INDICATE PATH TO
IN-SITU LEACHING IS FEASIBLE FOR EMA PROJECT
Highlights
•
Strong and rapid response to, down the hole water permeability field trials, results in high clay
zone percolation rates
•
Bench scale diffusion testing (mimics in-situ leach) of a high-grade sample, utilising magnesium
sulfate at 0.1M and 0.5M concentration has produced very positive MREE recoveries
•
Positive metallurgical2 and mineral resource estimate3 studies have result in a decision to
commence a formal Scoping Study to define the economic and technical pathway to production
for Ema project
•
Scoping Study will be led by Ausenco Ltd based on the current Mineral Resource Estimate of
>1Bt
•
Re-commencement of environmental baseline assessment to be conducted by CERN
•
Ongoing infill drill program now one-third complete with first results expected in September
Andrew Reid, Managing Director, commented:
“BCM now has a clear vision, to evaluate in-situ recovery (ISR) as the viable path towards development of the Ema
project. To create, utilising in-situ recovery coupled with magnesium sulfate leaching solution the greenest most
environmentally protective, cost-efficient, rare earth operation in the world.
The recent field trials completed over an initial set of holes to assess the ability of water to permeate through the
clay zone which would mimic that needed for in-situ leaching, has produced a compelling response that ISR is the
right direction for this project.
The lab diffusion tests have also shown that high recovery of MREE’s without any crushing, grinding, agitation,
screening or agglomeration can be extracted from the mineralisation.
The work front is now four-fold, the infill drilling program is approximately one-third complete, ANSTO are
continuing with their test program around impurity removal and precipitation towards generating a final MREC
product, Ausenco have been selected to lead the scoping study for Ema which will commence immediately, and
CERN are about to re-commence environmental base line studies over Ema.”
Brazilian Critical Minerals Limited (ASX: BCM) (“BCM” or the “Company”) is pleased to provide an
update on work programs with respect to the Ema Rare Earths Project which hosts an Inferred Mineral
Resource1 of 1.02Bt @ 793ppm TREO.
BCM now has a clear strategy in place in relation to the continued development of the Ema rare earth
project. The unique physical and chemical properties of the mineralisation are allowing the company to
evaluate in-situ leaching which we anticipate can withstand the current rare earth pricing conditions
and related rare earth oversupply in the market.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Field Permeability Trials
A series of preliminary controlled field experiments (slug tests) performed by the BCM team were
recently completed on 10 dry drill holes (Figure 1). These tests estimate the hydraulic properties of
aquifers, in which the water level in a controlled open dry drill hole is caused to rise suddenly and the
subsequent water-level response (change from static) is measured through time at regular intervals.
Figure 1. Location map of the 10 drill holes which were tested for permeability.
The slug tests were designed as a rising-head test, in which a measured volume of 50l of water was
placed into 10 holes, instantaneously raising the water level in the well by a known amount.
The goal of a slug test, is to estimate the hydraulic properties of an aquifer system such as hydraulic
conductivity.
Percolation data shows that the majority of the water inserted into each hole was lost or permeated
into the surrounding walls within the first 60 minutes (Figure 2). The second phase is the stable
percolation stage, where the water adsorption nears completion, and the percolation rate gradually
decreases.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Depth below surface (m)
Field Permeability Testing
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
0
5
10
15
20
25
30
60
90
120
150
180
210
Time (mins)
TR 174
TR 183
Figure 2. Hydraulic conductivity results from drill holes (TR174 & TR183). Tests show a rapid fall in water
level over the first 60 mins post the water insertion. Data from the 10 holes is collated in table 1.
Percolation rates varied from 0.98m/hr to 2.34m/hr and show that there is a high degree of permeability
within the clay horizons containing the rare earths. Field pumping trials are scheduled to commence
during Q4 2024.
The percolation characteristics of clay minerals are influenced by multiple factors, including ore
composition, pore structure, permeability, and the properties of the leaching solution.
Time (mins)
0
30
60
90
120
150
180
210
Static Water
level (m)
Percolation
m/hr
Hole Depth (m)
TR
158
4.42
9.00
9.52
9.82
9.94
9.98
TR
168
7.35
10.94
12.13
12.46
12.58
12.70
TR
168A
5.95
6.58
7.90
8.18
8.35
8.39
TR
164
5.40
8.55
8.77
8.80
8.86
TR
165
5.82
10.63
11.32
11.64
11.78
11.88
11.97
TR
177
9.92
9.95
TR
170
0.70
4.84
5.06
5.20
5.26
TR
181
0.35
5.40
5.82
5.98
6.09
6.12
TR
174
2.09
7.63
7.90
7.95
TR
183
3.00
7.43
7.96
8.22
8.36
8.46
8.57
8.60
9.98
12.70
dry
8.86
12.30
9.95
dry
dry
7.95
8.60
2.22
2.14
0.98
1.73
2.05
n/a
2.28 2.31
2.34
2.24
12.00
19.80
8.39
12.00 15.00 13.00 5.26 6.50
12.00
19.80
Table 1. Hydraulic conductivity results from the 10 dry drill holes tested. Tests show a rapid fall in water
level over the first 60 mins post the water insertion.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Lab Diffusion Testing
Agitated elution tests allow rapid access of reagent to the mineral surface and thus rapid desorption of
the eluted species, however, in an in-situ scenario this access is limited by solution flow through discrete
channels in the ore bed and diffusion through interstitial spaces.
While macroscopic solution flow in in-situ operations can be modelled with hydrological models based
on field observations, the local transport reaction kinetics of the elution process needs to be tested
separately.
A series of diffusion tests were conducted in a stagnant bed leach apparatus developed by Petersen [1]
as shown in Figure 3. A bed of 100 g of clay mineralisation was carefully moulded into the bottom of a
beaker to a height of about 10 mm, and 200 mL of lixiviant (0.5 M and 0.1 M MgSO4) was very carefully
poured on top of the bed so to not stir up solids. The solution was gently agitated with an overhead
stirrer. Liquid samples (3–5 mL) were taken every day for 30 days. The samples were analysed by ICPMS.
Figure 3. Stagnant bed diffusion test developed by Petersen.
Recovered MREE Grade
Diffusion Test - MREE Recoveries
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
0.5 M MgSO4 Days
0.1 M MgSO4
Figure 4. Overall cumulative recoveries from diffusion testing utilising magnesium sulfate at 0.5 M and
0.1 M concentrations over 30 days.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
The results of the stagnant bed diffusion test are shown in Figure 4. All of the magnet rare earth elements
leached in significant quantities (Nd, Pr, Dy, Tb) are shown. The curves show the characteristic profiles
for a diffusion-governed process, reaching equilibrium extraction (that is the extraction to be expected
if solid and liquid were perfectly mixed) over 30 days.
ISR is a proven cost effective and environmentally acceptable extraction process, which accounts for
approximately 57% of world uranium mined, and is used in Australia, USA, Kazakhstan, and
Uzbekistan.
Scoping Study
The company has now engaged several specialist companies to commence activities with respect to the
Ema rare earth scoping study. The team all have extensive experience in rare earths that will cover
project aspects including heritage, environmental, metallurgy, mining engineering, geology and
hydrogeology.
The scoping study will assess potential in-situ leach processing of the Ema project. It is estimated that
the bulk of the data gathering will be concluded by years end.
•
•
•
•
Ausenco: to provide engineering services for high-level scoping engineering outputs;
WSP: to demonstrate the suitability of ISR and to gather hydraulic data (aquifer properties,
pumping/injection rates to access ISR feasibility and to provide information for the development
of a numerical groundwater model based on field trials.
GE21: to complete an updated mineral resource estimate based on JORC 2012 Code standards;
and
CERN: to conduct baseline environmental assessment with a view to preparation of
Environmental Studies report for submission of a preliminary licence.
References
1. Petersen J (2016) Heap Leaching as a key technology for recovery of values from low-grade
ores–a brief overview. Hydrometallurgy 165:206–212
2. Brazilian Critical Minerals (ASX:BCM) World Class REE Recoveries at Ema Project on 13.03.24
3. Brazilian Critical Minerals (ASX:BCM) Massive Maiden Mineral Resource for Ema Project
22.04.24
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Competent Person Statement
The information in this announcement relates to previously reported exploration results for the
Ema/Ema East Project released by the Company to ASX on 22 May 2023, 17 July 2023, 19 July 2023, 31
July 2023, 13 Sep 2023, 19 Oct 2023, 06 Dec 2023, 06 Feb 2024, 22 Feb 2024, 13 Mar 2024 and 02 Apr
2024. The Company confirms that is not aware of any new information or data that materially affects
the information included in the above-mentioned releases.
The information in this announcement that relates to the Ema/Ema East Mineral Resource is based on
and fairly represents information compiled by Mr. Antonio de Castro (acts as BCM´s Senior Consulting
Geologist through the consultancy firm, ADC Geologia Ltda) and Mr. Leonardo Rocha, (employee of GE21
Consultoria Mineral Ltda). Mr. de Castro is a member of the Australasian Institute of Mining and
Metallurgy, and Mr. Rocha is a member of Australasian Institute of Geoscientists. Both have sufficient
experience of relevance to the styles of mineralisation and types of deposits under consideration, and
to activities undertaken to qualify as Competent Persons as defined in the 2012 Edition of the Joint Ore
Reserve Committee (JORC) Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves. Specially, Mr. de Castro is the Competent Person for the database (including all drilling
information), the geological and mineralisation model plus completed the site visits with Mr. Rocha. Mr.
Rocha is the Competent Person for the construction of the 3D geology/mineralisation model plus the
estimation. Mr. de Castro and Mr. Rocha consent to the inclusion in this report of the matters on their
information in the form and context in which they appear.
About Brazilian Critical Minerals Ltd
Brazilian Critical Minerals Limited (BCM) is a mineral
exploration company listed on the Australian
Securities Exchange.
Its major exploration focus is Brazil, in the Apuí
region, where BCM has discovered a world class Ionic
Adsorbed Clay (IAC) Rare Earth Elements deposit. The
Ema IAC project is contained within the 781 km² of
exploration tenements within the Colider Group.
BCM has defined an inferred MRE of 1.02Bt of REE’s
with metallurgical recoveries averaging 68% MREO
some of the highest for these types of deposits
anywhere in the world.
The Company is currently converting this MRE from
Inferred into the Indicated category with an extensive
drill program which will inform the scoping study and
economic analysis due for completion in late 2024.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Appendix 4
The following Table and Sections are provided to ensure compliance with JORC Code (2012
Edition).
JORC (2012) Table 1 – Section 1: Sampling Techniques and Data for auger hole drilling
Item
JORC code explanation
Comments
Sampling
Techniques
• Nature and quality of
sampling (eg cut channels,
random chips, or specific
specialised
industry
standard
measurement
tools appropriate to the
minerals
under
investigation, such as down
hole gamma sondes, or
handheld XRF instruments,
etc). These examples should
not be taken as limiting the
broad meaning of sampling.
• Diffusion test results are for a 195 kg composite sample
of 12 auger holes, from the drilling conducted by BCM´s
exploration team during 2023, conducted at BCM´s Lab
in Catalão, Brazil.
• 3 kg of the homogenized sample from each interval,
was used to make the composite.
• The preparation of the composite was supervised by a
BCM geologist.
• Holes were sampled using a powered auger drill (open
hole) conducted by BCM´s exploration team.
• Include
reference
to
measures taken to ensure
sample representativity and
the appropriate calibration
of any measurement tools
or systems used.
• Aspects
of
the
determination
of
mineralisation that are
Material to the Public
Report.
• Sampling was supervised by a BCM geologist or field
assistants.
• Every 1-metre sample was collected in a raffia bag in
the field and transported to the exploration shed to be
dried in the sun, prior to homogenisation.
• Samples were homogenised and subsequently riffle
split with about 1 kg sent to SGS for preparation and
analysis and a similar amount stored on site.
• 1 certified blank sample. 1 certified reference material
(standard) samples and 1 field duplicate sample were
inserted into the sample sequence for each 25 samples.
• In cases where ‘industry
standard’ work has been
done this would be
relatively
simple
(eg
‘reverse circulation drilling
was used to obtain 1 m
samples from which 3 kg
was pulverised to produce a
30 g charge for fire assay’).
In other cases more
explanation
may
be
required, such as where
there is coarse gold that has
inherent
sampling
problems.
Unusual
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Item
JORC code explanation
Comments
commodities
or
mineralisation types (eg
submarine nodules) may
warrant
disclosure
of
detailed information.
Drilling
Techniques
• Drill type (eg core, reverse
circulation,
open-hole
hammer, rotary air blast,
auger, Bangka, sonic, etc)
and details (eg core
diameter, triple or standard
tube, depth of diamond
tails, face-sampling bit or
other type, whether core is
oriented and if so, by what
method, etc).
• Auger drilling was completed by a hand-held
mechanical auger with a 3” auger bit. The drilling is an
open hole, meaning there is a significant chance of
contamination from surface and other parts of the
auger hole. Holes are vertical and not oriented.
• The maximum depth achieved with the powered auger
was 31m, and this was only achievable if the hole did
not encounter fragments of rocks/boulders etc. sitting
within the weathered profile, and/or the water table.
Final depths were recorded accordingly to the length of
the rods in the hole.
Drill
Sample
Recovery
• Method of recording and
assessing core and chip
sample recoveries and
results assessed.
• No recoveries are recorded.
• Measures
taken
to
maximise sample recovery
and ensure representative
nature of the samples.
• The operator observes the volume of each metre and
notes any discrepancy.
• When recovery is below 75% in two sequential one
metre interval, the field crew stops the drill hole.
• No relationship is believed to exist between recovery
and grade.
• Whether a relationship
exists between sample
recovery and grade and
whether sample bias may
have occurred due to
preferential loss/gain of
fine/coarse material.
Logging
• Whether core and chip
samples
have
been
geologically
and
geotechnically logged to a
level of detail to support
appropriate
Mineral
Resource
estimation,
mining
studies
and
metallurgical studies.
• All holes were logged by BCM geologists or field
technicians, detailing the colour, weathering,
alteration, texture and any geological observations.
Care is taken to identify transported cover from in-situ
saprolite/clay zones and the moisture content. Logging
was done to a level that would support a Mineral
Resource Estimate.
• Whether
logging
is
qualitative or quantitative
in nature. Core (or costean,
channel, etc) photography.
• The entire auger hole is logged.
• Qualitative logging with systematic photography of the
stored box.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Item
JORC code explanation
Comments
• The total length and
percentage of the relevant
intersections logged.
SubSampling
Techniques
and
Sampling
Procedures
• If core, whether cut or sawn
and whether quarter, half
or all core taken.
• If non-core, whether riffled,
tube sampled, rotary split,
etc and whether sampled
wet or dry.
•
• For all sample types, the
nature,
quality
and
appropriateness of the
sample
preparation
technique.
•
• Quality control procedures
adopted for all subsampling
stages
to
maximise representativity
of samples.
• Measures taken to ensure
that the sampling is
representative of the in-situ
material
collected,
including
for
instance
results
for
field
duplicate/second-half
sampling.
Quality of
Assay Data
and
• The composite sample was prepared in the Apui
•
•
•
exploration facility with 3.0 kg of each mineralized
interval previously homogenized from 12 auger holes,
then homogenised and split in six plastic bags which
were then sealed prior to shipment to Catalão.
The 3.0 kg sample size is adequate to represent each
individual samples in the composite.
At CATALAO the homogenised sample was split into
representative portions for head assay, and desorption
testing at SGS.
4 aliquots were used for the diffusion tests with
magnesium sulfate leaching, under different
parameters for concentration, all for 34 days in
ambient temperature and pressure.
2 aliquots of 50Kg were used for 2 column leach tests,
without agglomeration, in progress, one with
ammonium sulfate and the other with magnesium
sulfate, in ambient temperature and pressure with Ph
4.5.
Auger sampling procedure is completed in the
exploration shed in Apui.
• The entire one metre sample is bagged on site, in a
raffia bag which is transported to the exploration shed,
where it is naturally dried prior to homogenisation,
then quartered to about 1kg to go to SGS and another
1kg to store on site.
• Whether sample sizes are
appropriate to the grain size
of the material being
sampled.
• The composite sample was from the 1 kg sample stored
on site.
• Sample preparation for the composite, such as
pulverization and homogenization of the 49.6 kg was
conducted at ANSTO.
• Sample preparation for assay the auger samples was
conducted at SGS Vespasiano (greater Belo Horizonte)
comprising oven drying, crushing of entire sample to
75% < 3 mm followed by rotary splitting and
pulverisation of 250 to 300 g at 95% minus 150#
• The <3 mm rejects and the 250-300 g pulverised
sample were returned to BCM for storage, after all
assays were reported.
• The nature, quality and
appropriateness of the
assaying and laboratory
procedures
used
and
• The assays for REE in the ammonium and magnesium
solution from the 4 diffusion tests and the column
leach tests were conducted in BCM´s Catalão Lab.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Item
Laboratory
Tests
JORC code explanation
whether the technique is
considered partial or total.
• For geophysical tools,
spectrometers, handheld
XRF instruments, etc, the
parameters
used
in
determining the analysis
including instrument make
and model, reading times,
calibrations factors applied
and their derivation, etc.
• Nature of quality control
procedures adopted (eg
standards,
blanks,
duplicates,
external
laboratory checks) and
whether acceptable levels
of accuracy (ie lack of bias)
and precision have been
established
Comments
• All data reported were in elemental form and
presented in this announcement as received.
• QA/QC controls, incorporating standards, blanks and
duplicates for the PLS readings.
• The method for analysis of REEs in solution was by ICPMS.
• 1 blank sample. 1 certified reference material
(standard) sample and 1 field duplicate sample were
inserted by BCM into each 25-sample sequence.
• Standard laboratory QA/QC procedures were followed.
including inclusion of standard. duplicate and blank
samples.
• The assay results of the standards fall within acceptable
tolerance limits and no material bias is evident.
• The assay technique at SGS used for REE’s was lithium
tetaborate fusion / ICP-MS finish (SGS code ICP95A and
IMS95A). This is a recognised industry standard
analysis technique for REE suite and associated
elements. Elements analysed at ppm levels:
Ba Ce Co Cs Dy Er Eu Ga
Gd Hf Ho La Lu Nb Nd Pr
Rb Sm Sn Sr Ta Tb Th Tm
U
V
W Y
Yb Zr
Zn Co
Cu Ni
The sample preparation and assay techniques used
are industry standard and provide total analysis.
The ICP95A reports the major elements oxides used to
calculate the Chemical Index of Alteration (CIA) at %
levels:
Al2O3
CaO
Cr2O3
F2O3
K2O
MgO
MnO
Na2O
P2O5
SiO2
TiO2
• The SGS laboratory used for the RRE assays is ISO 9001
and 14001 and 17025 accredited.
• Analytical standard for REE ITAK-705 was used as CRM
material in the batches sent to SGS.
• The assay results for the standards were consistent
with the certified levels of accuracy and precision and
no bias is evident.
• The blanks used contain some REE. with critical
elements Ce. Nd. Dy and Y present in small quantities.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Item
JORC code explanation
Comments
• Duplicate samples were allocated separate sample
numbers and submitted with the same analytical batch
as the primary sample. Variability between duplicate
results is considered acceptable and no sampling bias
is evident.
• Laboratory inserted standards. blanks and duplicates
were analysed as per industry standard practice. There
is no evidence of bias from these results.
Verification
of Sampling
and
Assaying
• The
verification
of
significant intersections by
either independent or
alternative
company
personnel.
• The use of twinned holes.
• Documentation of primary
data,
data
entry
procedures,
data
verification, data storage
(physical and electronic)
protocols.
• Discuss any adjustment to
assay data.
• No independent or alternative verification of sampling
and assaying procedures was carried out.
• The diffusion test report was sent directly to BCM´s MD
in Australia.
• Analytical results for REE were supplied digitally,
directly from the SGS laboratory in Vespasiano to
BCM’s Exploration Manager in Rio de Janeiro.
• No twinned holes were used.
• Geological data was logged onto paper and transferred
to Excel spreadsheets at end of the day and then
transferred into the drill hole database. Microsoft
Access is used for database storage and management
and incorporates numerous data validation and data
integrity checks. All assay data is imported directly into
the Microsoft Access database.
• No adjustments were made to the data.
• All REE assay data received from the laboratory in
element form is unadjusted for data entry.
• Conversion of elements analysis (REE) to stoichiometric
oxide (REO) was undertaken by spreadsheet using
defined
conversion
factors.
(Source:https://www.jcu.edu.au/advanced-analyticalcentre/resources/element-to-stoichiometric-oxideconversion-factors).
Element ppm
Ce
Dy
Er
Eu
Gd
Ho
La
Lu
Nd
Conversion
Factor
1.2284
1.1477
1.1435
1.1579
1.1526
1.1455
1.1728
1.1371
1.1664
Oxide Form
CeO2
Dy2O3
Er2O3
Eu2O3
Gd2O3
Ho2O3
La2O3
Lu2O3
Nd2O3
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Item
JORC code explanation
Comments
Pr
1.2082
Pr6O11
Sm
1.1596
Sm2O3
Tb
1.1762
Tb4O7
Tm
1.1421
Tm2O3
Y
1.2699
Y2O3
Yb
1.1387
Yb2O3
Rare earth oxide is the industry accepted form for
reporting rare earths. The following calculations are
used for compiling REO into their reporting and
evaluation groups:
TREO (Total Rare Earth Oxide) = La2O3 + CeO2 +
Pr6O11 + Nd2O3 + Sm2O3 + Eu2O3 + Gd2O3 + Tb4O7
+ Dy2O3 + Ho2O3 + Er2O3 + Tm2O3 + Yb2O3 + Y2O3 +
Lu2O3
LREO (Light Rare Earth Oxide) = La2O3 + CeO2 +
Pr6O11 + Nd2O3
HREO (Heavy Rare Earth Oxide) = Sm2O3 + Eu2O3 +
Gd2O3 + Tb4O7 + Dy2O3 + Ho2O3 + Er2O3 + Tm2O3 +
Yb2O3 + Y2O3 + Lu2O3
CREO (Critical Rare Earth Oxide) = Nd2O3 + Eu2O3 +
Tb4O7 + Dy2O3 + Y2O3
(From U.S. Department of Energy, Critical Material
Strategy, December 2011)
MREO (Magnetic Rare Earth Oxide) = Nd2O3 + Pr6O11
+ Tb4O7 + Dy2O3
NdPr = Nd2O3 + Pr6O11
DyTb = Dy2O3 + Tb4O7
In elemental from the classifications are:
TREE:
La+Ce+Pr+Nd+Sm+Eu+Gd+Tb+Dy+Ho+Er+Tm+Tb+Lu+Y
HREE: Sm+Eu+Gd+Tb+Dy+Ho+Er+Tm+Tb+Lu+Y
CREE: Nd+Eu+Tb+Dy+Y
LREE: La+Ce+Pr+Nd
Location of
Data Points
• Accuracy and quality of
surveys used to locate drill
holes (collar and down-hole
surveys), trenches, mine
workings
and
other
locations used in Mineral
Resource estimation.
• Specification of the grid
system used.
• Auger collar locations were surveyed initially by GPS, at
an estimated accuracy of 2m.
• Posterior to the end of the drilling campaign, the collar
locations were picked up by a licensed surveyor using a
Trimble total station (+/- 5cm), referenced to a
government survey point. All drill holes have been
checked spatially in 3D.
Brazilian Critical Minerals Ltd (ABN: 82 089 221 634)
AUS: Level 28, 140 St Georges Terrace, Perth WA 6000 T +61 8 6383 7820
BRA: Av Jornalista Riccardo Marinho, 360, Sala 113, Barra da Tijuca, Rio de Janeiro T +55 21 2439 57
ASX Announcement
Released 19th August 2024
Item
JORC code explanation
• Quality and adequacy
topographic control.
Comments
of
• The grid system used for all data types in a UTM
projection is SIRGAS Zone 21 Southern Hemisphere. No
local grids are used.
• The auger holes collar coordinates for the holes used in
the resource estimation were surveyed to subdecimetre accuracy by a licenced surveyor.
Data
Spacing
and
Distribution
• Data spacing for reporting
of Exploration Results.
• Whether the data spacing
and distribution is sufficient
to establish the degree of
geological
and
grade
continuity appropriate for
the Mineral Resource and
Ore Reserve estimation
procedure(s)
and
classifications applied.
• Whether
compositing
applied.
Orientation
of Data in
relation to
Geological
Structure
has
• Auger holes were over 200m to 800m apart, designed
for testing iREE mineralisation over the mapped felsic
volcanics.
• The data spacing and distribution is sufficient to
establish the level of REE elements present in the
target area and its continuity along the regolith profile
appropriate for a Mineral Resource.
• No sample composition was applied.
sample
been
• Whether the orientation of
sampling achieves unbiased
sampling
of
possible
structures and the extent to
which this is known,
considering the deposit
type.
• The location and depth of the sampling is appropriate
for the deposit type.
• Relevant REE values are compatible with the
exploration model for ionic REEs.
• No relationship between mineralisation and drilling
orientation is known at this stage.
• If the relationship between
the drilling orientation and
the orientation of key
mineralised structures is
considered
to
have
introduced a sampling bias,
this should be assessed and
reported if material.
Sample
security
• The measures taken to
ensure sample security.
• The auger samples in sealed plastic bags were sent
directly to SGS by bus and then airfreight. The Company
has no reason to believe that sample security poses a
material risk to the integrity of the assay data.
Audit or
Reviews
• The results of any audits or
reviews
of
sampling
techniques and data
Share your feedback
Discover